Pages

Saturday, July 23, 2011

facebook load faster


ramai yang merungut facebook lembab dan lambat loading dua tiga hari ni. Ada berita yang memberitahu ,masalah ni terjadi disebabkan gempa bumi tang berlaku di Jepun menyebabkan kabel bawah laut terjejas dan ada sedikit kerosakan. Untuk kali ni aku nak bagi tutorial macammana nak buat loading page facebook lebih cepat dan tak menyakitkan hati .
ADA 6 STEP UNTUK TURORIAL NI. SILA IKUT SATU PERSATU OKEHH!!
STEP 1. mula mula buka My Computer
image
STEP 2. Copy    perkataan nie  
 C:\Windows\System32\drivers\etc\   
pastu pastekan dalam address bar di atas sekali tu dan tekan ENTER..seperti contoh di atas
lepas tu akan jadi macam ni
image
STEP 3. anda nampak kan file yang bernama “hosts” ?open file tu . Right click dan pilih open with Notepad
image
bila dah open. Akan keluar file macam ini
image
STEP 4, JANGAN EDIT ATAU KACAU code lain.sekarang anda cuma perlu  pastekan perkataan dibawah ini dibahagian paling bawah file tersebut
pastekan perkataan ini
203.106.85.66 www.facebook.com
203.106.85.66 facebook.com
dan akan jadi seperti ini
image
STEP 5. lepas tu tekan SAVE .Pilih save as type –All Files dan gantikan file “hosts” tersebut
image
STEP 6 .dan siap. Browser anda akan menjadi laju sekarang. Kalau lambat jugak, memang ada masalah dengan berukben atau streamyx atau P1W1Max anda…
PERHATIAN : ada sesetengah pengguna yang menghadapi masalah TAK BOLEH SAVE file tersebut. Macammana untuk selesaikan masalah tu?senang ja. Ikut tutorial dibawah
Buka file “hosts” seperti di awal tutorial dan copy file tersebut ke Desktop.Edit seperti STEP 4 di awal turorial ini dan SAVE di DESKTOP .
image
kemudian Copy file “hosts” tersebut dan paste di bahagian awal tadi. DiC:\Windows\System32\drivers\etc\  (STEP 2).Gantikan file sedia ada dengan file yang telah anda edit .
 Dan siap untuk diguna
Sekian untuk tutorial kali ni. Harap korang faham. Ada masalah jangan segan segan untuk komen disini.InsyaAllah akan dijawab.


P/S :ORIGINAL COPY FROM BLOG HAZRILHAFIZ. THANKS :) dan http://embunmenitis-yaya.blogspot.com
        :SHARING IS CARING :p
        :NAK COPY KLIK CTRL + C  SERENTAK :)

Thursday, July 21, 2011

Avira Error in updating

Why do I get the error message 537 during update?

Based on the customer support feedback, this article provides solutions to the most common causes of error during AntiVir updates.
Start Avira AntiVir Control Center and click Start update. A window with an error message may appear.



Click Report to open the update report of the error message. You can see the error message at the end of the report, above the summary. If there is a problem regarding the Internet connection of the AntiVir Update program, you will see the following or a similar error message:
16:15:24 [UPD] [ERROR] Generation of update structure failed. UpdateLib delivers error 537.
  1. Probably the Windows system settings could not be detected
    1. Start AntiVir Control Center
    2. Go to Extras - Configuration
    3. Activate the Expert mode
    4. Click General - Proxy settings
    5. Click the option No proxy server if you do not use a proxy
    6. Click OK to apply the configuration
       
  2. A security software with firewall is blocking the AntiVir update process update.exe Check if you have another security software with a firewall installed on your computer. Open the Windows Start menu, to see the list of the installed software.
    If you can identify the security software with the firewall, you can generally see and modify the list of allowed and blocked applications in the firewall's settings. Make sure that none of AntiVir's program files are blocked, including sched.exe and update.exe
  3. Check the Network settings in AntiVir Control Center
    1. Start AntiVir Control Center
    2. Go to Extras - Configuration
    3. Activate the Expert mode
    4. Click the + sign next to Update
    5. Click Web server
    6. Select the option Use existing connection (network), if the connection to the Internet is not automatic. Else, select the second option Use the following connection and select from the list the dial-up connection you use.
    7. Click OK to apply the settings.
  4. Do you use a proxy for the Internet access or a security software, which installed a local proxy? Usually, most of the Internet surfers do not need to configure a proxy, to connect their computers to the Internet. If the computer is in a company network or if a security software installed a local proxy on it, to filter Internet data, then you also have to make these settings in the Avira software, to run AntiVir updates.
    To check if there is a proxy set on your computer:
    1. Go to Start - (Settings) - Control Panel - Internet options
    2. Click the Connections tab
    3. Under Local Area Network (LAN) settings click the LAN settings button
    4. Check if the option Use a proxy server for your LAN... is active
    5. Write down the proxy address and port
    6. Close the configuration windows with OK
    Then open the configuration of AntiVir Control Center and similar to case A, insert the data you wrote down. Type the Address and Port of the proxy server for the option Use the following proxy server. Leave the other fields empty.
  5. AntiVir Update is not run with proper access rights This is a workaround, for placing a shortcut to AntiVir Update on the Desktop, which will then run with different access rights.
    1. Right-click anywhere on the Desktop
    2. Select New - Shortcut from the context menu
    3. Copy one of the following lines as location:
      • For Windows 2000/XP:
        "C:\Program Files\Avira\AntiVir Desktop\update.exe" /DM="0" /NOMESSAGEBOX /RECEIVETIMEOUT=120
      • For Windows Vista/7 (32-bit):
        "C:\Program Files\Avira\AntiVir Desktop\update.exe" /DM="0" /NOMESSAGEBOX /RECEIVETIMEOUT=120
      • For Windows Vista/7 (64-bit):
        "C:\Program Files (x86)\Avira\AntiVir Desktop\update.exe" /DM="0" /NOMESSAGEBOX /RECEIVETIMEOUT=120
    4. Click Next
    5. Give a name to the shortcut, for example AntiVir Update
    6. Click Finish
    Then click the new shortcut and check if AntiVir Update runs successfully. For the next automatic update, make sure the error 537 does not occur anymore.
  6. AntiVir Update continues to report error 537 In case none of the above solutions helped fixing the error, manual update is recommended, as described in the following article:
    How to carry out manual update (IVDF Fusebundle)?
    For a more exact error localization, please contact Avira Customer Support.

Monday, July 4, 2011

How to Show Hidden File

Windows 7 hides certain files so that they are not able to be seen when you exploring the files on your computer. The files it hides are typically Windows 7 System files that if tampered with could cause problems with the proper operation of the computer. It is possible, though, for a user or piece of software to set make a file hidden by enabling the hidden attribute in a particular file or folder's properties. Due to this it can be beneficial at times to be able to see any hidden files that may be on your computer. This tutorial will explain how to show all hidden files in Windows 7.
To enable the viewing of hidden and protected system files in Windows 7 please follow these steps:
  1. Close all programs so that you are at your desktop.

  2. Click on the Start button. This is the small round button () in the lower left corner of your screen that has a Windows flag on it.

  3. Click on the Control Panel menu option.

  4. When the control panel opens you will see a screen similar to Figure 1 below.


    Figure 1. Windows 7 Control Panel
    Figure 1. Windows 7 Control Panel



  5. Click on the Appearance and Personalization link.

  6. You will now be in the Appearance and Personalization control panel as shown in Figure 2 below.


    Figure 2. Windows 7 Appearance and Personalization screen
    Figure 2. Windows 7 Appearance and Personalization screen


    Now click on the Show hidden files and folders option as shown by the red arrow in Figure 2 above.

  7. Under the Hidden files and folders section select the radio button labeled Show hidden files, folders, and drives.

  8. Remove the checkmark from the checkbox labeled Hide extensions for known file types.

  9. Remove the checkmark from the checkbox labeled Hide protected operating system files (Recommended).

    Once this is done, your Folder Options screen should look similar to the following image.


    Figure 3. Folder Options screen
    Figure 3. Folder Options screen



  10. Press the Apply button and then the OK button.
You will now be at your desktop and Windows 7 will be configured to show all hidden files.